|
|
![Hyperion EOS 5IDP-A CHARGER [HP-EOS5IDP-A]](Images\Upload/HP-EOS5IDP-A_0.jpg)
|
Hyperion EOS 5IDP-A CHARGER [HP-EOS5IDP-A]
Универсальное зарядное устройство Hyperion EOS 5IDP-A (без БП и балансира)
Заряжает как NiCd/NiMh...
|
 |
| в наличии: |
 1 /комплект/ |
|
|
|
Универсальное зарядное устройство Hyperion EOS 5IDP-A (без БП и балансира)
Заряжает как NiCd/NiMh (до 14 банок) так и LiPol/LiIon батареи (до 5-х банок) зарядный ток до 5А.(до 50Вт)
Имеется режим разряда Ni** батарей до 1А (до 5Вт).
Интерфейс для подключения балансира LBA10
Диапазон входного напряжения 11.0-15.0V постоянный ток
Подходящие типы батарей и количество подключаемых групп элементов
1-14 NiCd Никель-Кадмиевые элементы
1-14 NiMh Никель-Металлгидридные элементы
1-5 LiPo элементы, 100~5000мАч (тип 3.7В/элемент)
1-6 LiFe (A123) элементы (тип 3.3В/элемент)
1-6 Pb Свинцово-кислотные элементы (номиналом 2В/элемент)
Ток зарядки 0.1A ~ 5A макс., шагом по 100 мА (ограничение 50W)
Ток разрядки 0.1A ~ 1A макс., шагом по 10 мА (ограничение 5W)
Ток подзарядки (NiCd, NiMh) 0 ~ 200 мА
Завершение зарядки:
"zero delta V" определение пика для NiCd/NiMH
"CV/CC" для LiPo, A123, Свинцово-кислотных батарей
Режимы циклирования (NiCd, NiMh): Зарядка>Разрядка и Разрядка>Зарядка
Тип дисплея ЖК, 2-строчный, 16-символьный с подсветкой
2 Line LCD for charge monitor and post data display
Charge/Discharge
*1-14 cell NiCd/NiMH Batteries
*2-12v Lead Acid Batteries
*1-5 cell Lithium Ion or Lithium Polymer Batteries
Li-Po PCM Guard and Balancer Safe
DataPort Interface for EOS LBA 10 Balancers
0.1-5A Charge Current
0.1-1A Discharge Current
Fast Auto Charge Algorithms for NiCd and NiMH
12.0~15.0V DC input voltage
Audible Function Alarm
Easy Lithium Programming
Output Charge Cord/Connector set included
Double-length Input cord for convenience
The EOS 5i DP DP is a versatile, easy-to-use charger with special features for fast charging, discharging and cycling NiCd and NiMH packs of up to 14 cells, Lithium packs to 5S, and lead-acid batteries to 12V.
It contains advanced features to support safer charging of Lithium batteries, including special circuitry to insure that PCM Guard devices are not damaged on open-circuit conditions. Most chargers will output a high voltage when encountering PCM open circuit, thus damaging the PCM, but the EOS 5i DP limits output to an always- safe maximum of 25V.
The DataPort version EOS chargers, when connected to LBA10 balancer via cable #HP-EOSLBA10-DPC, allow the user to monitor the individual voltages of each battery cell during the charge process. The LBA communicates with the charger, giving notification when balance charging is completed, or when an error is detected and tells the charger to shut down. This insures maximum safety.
The EOS 5i DP, with its max charge rate of 5 ampere, is ready for large capacity lithium packs. The discharge and cycling programs allow you to easily diagnose the condition of your packs, with a Data View mode that conveniently displays detailed information about the charge or discharge cycle.
The EOS 5i is similar to another market-leading charger made in the same South Korean factory, but has these important improvements:
The EOS 5i is limited to Lithium-Polymer and Lithium ION batteries with nominal voltage of 3.7V per cell. Selection for legacy Li-Ion batteries having 3.6V/cell is not available (3.6v Li-Ion cells are obsolete since 2003, in our opinion...). This makes the Charger much easier to use, as an entire second-level menu is eliminated. Having only one type of cell also allows the EOS 5i to display lithium 1S, 2S, 3S, 4S, 5S... rather than choosing a voltage. So the EOS 5i interface is easier to use and safer because you can't choose the wrong per-cell voltage.
Input cord (to car battery, etc) is twice as long, so you can rest the charger on the ground rather than trying to balance it on top of a hot car engine.
Charger comes with red/black output charge cords: 20cm long, 12 ga silicone wire, two 4mm Male Banana Plugs attached one end, soldered wire other ends. The customer only need solder on his preferred battery connector. (you can see the cords attached in the picture above)
As noted above, the EOS 5i limits voltage on open circuit, so that it is guaranteed safe for any PCM or Balancer device. This is unique to the Hyperion EOS Charger line.
|
|
|
|
|
|