|
|
|
HP-EM2 Hyperion Emeter2
Hyperion Emeter2
Part Number: HP-EM2
Product Description
Use the...
|
 |
| в наличии: |
 0 /комплект/ |
|
|
|
Hyperion Emeter2
Part Number: HP-EM2
Product Description
Use the Emeter to program Hyperion ATLAS servos, TITAN Electronic Speed Controllers and make model optimizations by experimenting with choice of propeller, battery pack or any other component in the electric drive line.
All of this can be achieved on the flying field with the hand held Hyperion Emeter V2. The Hyperion Emeter V2 does not only excel while at the field.
By connecting the RDU to a Windows XP or Vista (R) based computer (requires a Titan USB cable, HP-TI-PRGUSB) data can be further analyzed, recorded sessions can be saved to disk as a whole or in segments which can easily be emailed to friends or stored for documentation.
Live bench testing is also possible.
•Emeter V2 handheld device for use with RDU
•RDU required for measurements - look to HP-EM2-SET and HP-EM2-DLX for complete package.
The new Emeter provides rare and important insights into electric motor efficiency, model behavior, temperatures and RPM.
Included
Emeter II (HP-EM2)
Data Cable (HP-EM2-4PINCBL)
Charge Lead (HP-EM2-PWRCBL)
Specifications:
Voltage range/resolution: 0-75V, 0.01V
Current range/resolution: 0-75A, to 150A for 30s, up to 300A for 5s*, 0.1A
Tachometer range: to 65,000 RPM, one to seven blades
Tachometer types: Optical and brushless phase sensor (connected to RDU)
Power: Internal 5-cell 750 mAh NiMH battery
Emeter Ⅱ Dimensions: 58x120x30 mm
Weight: 150g
Note: The maximum currents listed above are highly dependent on ambient air temperature and especially the amount of cooling airflow that passes through the RDU
Please use a 12 – 15 volt, 100ma source to charge the internal Nicd battery.
See Manuals&Support for full specifications, more photos, and recommended items for completion.
|
|
|
|
|
|