Бесколлекторный мотор Turnigy Multistar Elite 3508-268KV High Voltage Endurance Motor для мультикоптеров
The Turnigy Multistar Elite Outrunners are designed with one thing in mind — maximizing Multi-rotor performance! The new Multistar Elite motors are the new standard in Multirotor performance. Each Elite motor is built for a specific type/application allowing for further refinement and efficacy/power to be optimized.
Multistar Elite motors are more than a fancy name and new dark green color.. Built using the highest quality components from EZO Japan bearings, n45sh Magnets, .2mm laminations, 180deg oxygen free copper wire, .005g balancing, Perfect wind laid down and 100% QC, and then the design of each motor are also evaluated for their type application and everything from their mounting, to the prop type adapters are taken into consideration. The Elite motors are truly works of art
The Elite 3508 268kv Has been optimized for 8s operation and a 12~14inch propeller. The Motor comes with removable/replaceable knurled prop shaft and direct bolt style propeller mounting options. The high efficiency and low amp draw of HV setups take advantage of higher density/low C batteries, and offer record breaking flight times.
Multistar Elite is unmatched in quality and value, and the performance speaks for its self.
Features:
• EZO Japan Bearings
• N45SH Magnets
• .2mm Laminations
• 180deg oxygen free Copper wire
• .005g Or better balancing
• Perfect laydown windings
• 100% QC
• Replaceable CW/CCW prop adapter and direct bolt prop supported
Характеристики:
KV(RPM/V): 268KV
Напряжение: 2-8S (7,4-29,6В)
Рабочий ток: 2-4А
Максимальный ток (10с): 11А
Ток спокойствия: 0,13A/10V
Максимальная мощность: 330W
Магниты: N45 SH
Диаметр вала: 4мм
Диаметр оси винта: 5мм
Полюса: 12/14
Внутреннее сопротивление: 0.618 Ohm
Разъемы: 3.5mm Bullet Connector
Размеры: 35 x 8мм
Посадочные отверстия мотора: 19*25мм
Масса: 96г
Подшипники: EZO Japan
Балансировка: 0.005г
Prop data:
Multistar 3508 268KV @ 32V (8s)
12.5×6 50% 800g 4A 100% 1200g 7A
13×3.8 SF 50% 580g 1.5A 100% 1320g 4.9A
13×4.7 SF 50% 620g 2.2A 100% 1410g 5.2A
13×5.5 C 50% 670g 2.7A 100% 1600g 6.8A
14×4.7 50% 710g 3A 100% 1460g 7.8A
Multistar 3508 268KV @ 25V (6s)
14×4.7 50% 598g 2.4A 100% 1030g 5.6A
15×5 M.S.W 50% 712g 2.8A 100% 1144g 5.8A
A 680mm Hex such as the Tarot or 680UC pro Quanum AUW with battery and gimbal weighs 2.5~3.2Kg @ 3Kg/6(motors)=500g lift needed per motor to hover.
Hover efficiency 3508 268KV @ 32V (8s) 500g thrust x 6 =3K
12 wood 1.96A
11×5.5 APC speed 2.3A
13×3.8 sf 1.5A (X 6= 9A hover)
13×4.7 sf 1.6A
13×5.5 C 1.6A
13×6.5 APC 1.9A
14×4.7 sf 1.4A (X 6= 8.6A hover)
Hover efficiency 3508 268KV @ 25V (6s) 500g thrust x 6 =3Kg
15×5 Multistar White 1.7A (x 6=10.2A hover)
14×4.7 SF 2A
This sub 10A hover can allow the use of high density low discharge batteries. The increased capacity vs weight will increase flight time. Flights over 1 hour are possible with special batteries such as the Panasonic 18650 or GEB cells.
MOTOR-BL-MR
Внимание! Cлишком длинные крепежные болты могут повредить обмотку мотора, что выведет его из строя.
|