|
КАТАЛОГ | R/C Вертолеты | ALIGN T-REX 450 PRO DFC Super Combo [KX015087]
|
ALIGN T-REX 450 PRO DFC Super Combo [KX015087]
Модель вертолета T-REX 450 PRO DFC Super Combo [KX015087]
Комплект для сборки бесфлайбарной...
|
|
в наличии: |
0 /комплект/ |
|
|
Модель вертолета T-REX 450 PRO DFC Super Combo [KX015087]
Комплект для сборки бесфлайбарной DFC модели 450-го класса с электроникой.
В комплекте: Кит вертолета T-REX 450 PRO DFC, карбоновые лопасти 325 3G, регулятор оборотов RCE-BLX (35A), бесколлекторный двигатель 450МX, три цифровых серво для автомата перекоса DS415M, цифровую хвостовую серву DS520 или DS525, бесфлайбарная система 3GX.
Необходимо для полетов и эксплуатации:
●11.1V 3S Li-Po 2000~2300mAh аккумулятор и ЗУ к нему
●Цифровой или механический угломер для лопастей
●Аппаратура управления не менее 6 каналов с вертолетной программой. KITHELIALIGN
Product: |
|
Focus Shot1(Equipped with the DFC flybarless head head assembly, with extremely low CG design to minimize wid resistanec) |
Focus Shot2(New 450DFC CCPM Metal Swashplate) |
Focus Shot3(Integrated battery / ESC mount,
allowing adjustment based on battery dimension for optimal CG of the helicopter) |
|
|
|
Focus Shot4(New removable main shaft block and servo mounting block) |
Focus Shot5(Removable structure for easy servos assembly) |
Focus Shot6(Highly efficient helical main gear) |
|
|
|
Focus Shot7(New style gyro mounting platform with added length) |
Focus Shot8(Vertical rudder
servo mount design moving the CG closer to center) |
Focus Shot9(High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly) |
|
|
|
Focus Shot10(450MX Brushless motor 3400KV) |
Focus Shot11(325D 3G Carbon blades) |
Focus Shot12(DS415M (Metal Gear)Digital servo) |
|
|
|
Focus Shot13(DS520 Digital servo) |
Focus Shot14(3GX Flybarless System) |
Focus Shot15(RCE-BL35P 35A Brushless ESC) |
|
|
|
Package 1: |
|
Package 2: |
|
Instruction(3GX Programmable
Flybarless System) :
|
Specification(3GX Programmable
Flybarless System) : |
●Brand new redesigned 3GX
represents a new generation of multi function flybarless system. The dramatically
improved performance will create immediate impact on any enthusiasts.
●3GX is currently the smallest and lightest flybarless system on the market.
Two ports to directly connect Spektrum and JR satellite receivers, along
with full support of Futaba's S-BUS system.
●Based on the 3G FL760 manual setup process, the 3GX can be setup in a
few minutes through a simple process. In addition, the 3GX can support
all of the CCPM swashplate system currently on the market including 90,
120, 135, and 140 degrees swashplates.
●Graphical illustrated instruction on the computer setup software directs
the user through a step by step setup process, allowing for quick setups
without omitting any steps.
●Support Bluetooth connectivity. With the soon to be released Bluetooth
connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually
there will also be smartphone apps allowing live adjustments to 3GX without
powering down.
●With 3GX's built in Align RCE-G600 governor function, no external governor
is needed to reduce electronic wire clutters.
●Custom parameters have been opened up in 3GX to allow pilots to fine tune
numerous settings for swashplate and rudder. Settings export feature allows
custom settings to be shared amongst friends.
●3GX utilizes brand new gyroscope sensors of the highest specifications
when compared to other flybarless systems currently on the market, allowing
it to be used under harsh conditions. Dual axis plus rudder sensor dramatically
improves swashplate and rudder correction precision compared to last generation
3G. This is clearly noticeable in stable hover as well as highly aerobatic
routines.
●Suitable for helicopter of all class from 250 to 800, glow engine or electric
powered. The superior vibration resistant characteristic is evident even
when mounted with harder double sided mounting tape.
●3GX utilizes 16 bit processor which is 4 times faster than previous generation,
along with a completely re-written firmware. The result is a dramatic stability
improvement from previous generation, with stability that rivals a flybarred
helicopter, yet posses explosive agility.
●With built in pirouette compensation function, 3GX is able to stabilize
the helicopter on a fixed point during pirouetting maneuvers. Pirouetting
flips type of maneuvers are easily accomplished with precision.
●3GX's rudder allows consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
●Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, and even autonomous way point flights as well as return home.
|
●Operating Temperature:-10~60
degree
●X and Y axis Operating Angle Range:-300~+300 degree
●Z axis Operating Angle Range:-600~+600 degree
●Size:36.5x25.2x15.6 mm Size
●Weight11g Weight
●Supports Wide/Narrow Bandwidth Digital and brushless servos
●Spektrum and JR Satellite antennas support (Replaces original factory
receiver)
●Futaba S.BUS system support
●Built in governor function
●Maximum working voltage:8.5V
●Compatible with 1024/2048 resolution Spektrum receivers
●Supports 90/120/135/140 CCPM swashplates
●Field setup without the use of a PC
●Compatible with 2 to 5 blades rotor heads
●Support up to 6 servos
●Automatic servo type recognization
|
Instructions:(T-REX 450PRO
DFC) |
Specification:(T-REX 450PRO
DFC) |
Features:
● Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed.
● New removable main shaft block and servo mounting block to simplify main shaft and servo maintenance.
● Integrated battery and ESC mounting platform, with adjusted battery position to achieve the most optimal CG position of the helicopter.
● Vertical rudder servo mount design for closer CG, increasing the sportiness of 3D flights.
● New improved frame side plates with dedicated 3GX mounting location, to simplify wire management and overall aesthetics.
● New style gyro mounting platform with added length.
● Highly rigid and lightweight carbon side plates.
● New style dual point supported tail control assembly for slop free tail, improving on rudder resolution and control precision.
● Unique anti-centripetal force weight tail blade grips to improve rudder locking effect.
● Equipped with Align's brand new MX series high efficiency brushless motor.
● Highly efficient torque tube tail drive design, dramatically reduce power loss found on belt driven system.
● Streamlined design canopy.
Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.
|
●Length: 640mm
●Height: 204mm
●Main Rotor Diameter: 710mm
●Tail Rotor Diameter: 158mm
●Motor Drive Gear: 12T
●Main Drive Gear: 121T
●Autorotation Tail Drive Gear: 106T
●Tail Drive Gear: 25T
●Drive Gear Ratio: 1:10.08:4.24
●Weight(w/o power system): 513g
●Flying Weight: Approx. 638g
|
Accessories: |
●T-REX 450 PRO DFC Kit X 1 set
●3GX Flybarless System X 1 set
●325D 3G Carbon blades X 1set
●RCE-BL35P 35A Brushless ESC X 1
●450MX Brushless motor(3400KV) X 1
●DS415M (Metal Gear)Digital servo X 3
●DS520 Digital servo X 1
Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gaugeX1
4.11.1V 3S Li-Po 2000~2300mAh batteryX1 |
|
|
|
|
|